power brakes
Thread Starter
|
Senior User
Joined: Oct 2003
Posts: 145
Likes: 0
From: Gettysburg PA
power brakes
Hey. I just bought me a 67 f100! I was wondering what the "junk yard recipe" would be to change this over to power brakes. Right now its four wheel drum and no power and it stinks! any help on this subject would be appreciated!!
Elder User
Joined: Aug 2003
Posts: 693
Likes: 0
From: Tuttle, Oklahoma
did the same here, used the entire front susp. from a 74 and the mastercylender/booster from the same.I kept the stock pedal and just spliced in a 1 inch piece of steel to the stock actuator arm to get the pedal height back to where it belongs. and I have been running that setup for about 3 years now and not one problem.
Oh, btw, make sure you get the proportioning block from your donor truck to equalise the brakes if you do the drum to disk swap!
the whos thing cost me less than $200, money very well spent.
Oh, btw, make sure you get the proportioning block from your donor truck to equalise the brakes if you do the drum to disk swap!
the whos thing cost me less than $200, money very well spent.
Thread
Thread Starter
Forum
Replies
Last Post
RJ67f100
1967 - 1972 F-100 & Larger F-Series Trucks
6
Oct 30, 2015 01:45 PM
elemint
1967 - 1972 F-100 & Larger F-Series Trucks
13
Oct 13, 2004 05:30 PM
thesprocket26
Brakes, Steering, Suspension, Tires, & Wheels
1
Oct 10, 2004 05:31 PM
jowilker
1967 - 1972 F-100 & Larger F-Series Trucks
4
Jun 10, 2000 11:59 PM
