Help with cooling system pressure
Lead Driver
Joined: Dec 2006
Posts: 6,496
Likes: 94
From: So. Jersey
If you have over 100k miles on it I would replace the lifters you have access to. If I ever had to do heads on another of these motors, I pull it so I could replace all the lifters.
I’d change my mind if a few people with 100k plus miles destructively inspected the lifters and I saw the needles were all excellent.
I’d change my mind if a few people with 100k plus miles destructively inspected the lifters and I saw the needles were all excellent.
Hotshot
Joined: Dec 2014
Posts: 17,836
Likes: 3,136
From: Jersey Shore
Yeah, if you don’t mind wiping them out, Pete. I’m really curious if the damage to my needles were only due to my motors debris, or if there’s more going on with other motors.
I’m scheduled to be down at my doc at Atlanticare Sept 10, or if you want to mail them I’ll pick up the postage. Or you could check them, hammer and punch.
I’m scheduled to be down at my doc at Atlanticare Sept 10, or if you want to mail them I’ll pick up the postage. Or you could check them, hammer and punch.
Thread
Thread Starter
Forum
Replies
Last Post
2006powerstroke90
6.0L Power Stroke Diesel
10
Dec 1, 2016 08:01 AM
JPs2003
1999 - 2003 7.3L Power Stroke Diesel
21
Jun 11, 2011 07:48 PM
