My new CNC ported heads have arrived! w/pics
#1
My new CNC ported heads have arrived! w/pics
I am stoked. Check out my gallery for pics of my new heads, they are fresh from Keith Craft for my aluminum 511 project. CNC ported edelbrocks with titanium valves. Everything set for my roller cam.
Flow numbers are as follows:
Lift Int/Exh
.200 170/108
.300 226/155
.400 281/189
.500 318/217
.600 351/236
.700 375/246
.800 381/259
Now I have to go see if there's room in bed for me, my heads, and my wife. The wife may have to sleep on the couch.
-Scouder
Flow numbers are as follows:
Lift Int/Exh
.200 170/108
.300 226/155
.400 281/189
.500 318/217
.600 351/236
.700 375/246
.800 381/259
Now I have to go see if there's room in bed for me, my heads, and my wife. The wife may have to sleep on the couch.
-Scouder
#3
Click on "View user's gallery" over to the left, then click where it says "76 F250 511ci aluminum 427". The pictures will be listed on that page.
I'll be changing the descriptions since it's not going to be a tunnelport anymore. These new heads kick the crap out of my tports on the flowbench.
-Scouder
I'll be changing the descriptions since it's not going to be a tunnelport anymore. These new heads kick the crap out of my tports on the flowbench.
-Scouder
Last edited by Scouder; 10-05-2003 at 08:47 PM.
#5