Was ordering some frame savers for fixing my cross member and came across this seat adapter. It fits the stock location and let's you put in buckets like below. Of course I would have to custom fab a rock awesome center console to go with this.

​​​​​​

You can then slap in seats like these in the truck

 

2 seats would be more than I paid for my truck!
Then you have to get the mount too.
To rich for my blood.
Dave - - - -

 

I was going to reupholster my bench, it's not much of a price difference at that point. Front an back vynil is about $375+ tax, shipping and labor. If I find any damage under the cover then the new seat foam is several hundred dollars too.

 

I had my local upholstery shop rebuild the driver's side foam with some heavy duty foam. He cut away the old worn out foam and cut a new piece which he glued in place with a spray adhesive. Patched and sewed to reinforce the original bench cover for about $50. Then I threw on a Saddleman seat cover for about $50 bucks. Has held up well for many miles and years. The original foam was not as tough as the stuff he put in. So am expecting it to last quite a while longer. If you have a foam source and a special foam knife and a good industrial sewing machine or hand stitch it you could do the repair yourself.

BB2