2005 Excursion body mounts
Thread Starter
|
Mountain Pass
Joined: Apr 2014
Posts: 155
Likes: 5
Is it ok to replace only one mount and not all?
And what is the possible fallout of using one new
polyurethane mount if the rest are rubber?
And what is the possible fallout of using one new
polyurethane mount if the rest are rubber?
My apologies, I was thinking the Daystars were rubber. They are in fact polyurethane.
I'd go with the energy suspension polys personally. I've used their parts and they seem to have a good compound on the poly.
I looked at White Bear Lake Ford's website and they don't carry them for the X. I also looked at the F250 parts for the same year and nothing.
I'd go with the energy suspension polys personally. I've used their parts and they seem to have a good compound on the poly.
I looked at White Bear Lake Ford's website and they don't carry them for the X. I also looked at the F250 parts for the same year and nothing.
Fleet Mechanic
Joined: Jan 2017
Posts: 1,667
Likes: 182
Ehh....I'm not sure I would. If all the rest look really good, you might get away with it. I don't think you'll notice a difference with one changed, but who knows.
Cargo Master
Joined: Jun 2013
Posts: 2,079
Likes: 63
From: Florida and Tennessee
It would be like using a spare tire until you could get a new tire. You may not notice anything bad, but you will notice a change. My earlier statement still remains true.
Thread
Thread Starter
Forum
Replies
Last Post
