Van 4x4 conversion with IFS
Freshman User
Joined: Sep 2017
Posts: 33
Likes: 1
From: Florida
I have a 4x4 Van, converted myself with MG Fabrications coil spring kit and Dana 60 front axle.
If youre looking at doing a TTB swap see if you can find or talk to an owner of a Agile Offroad converted 4x4 van, theyve been successfully doing the TTB for years.
Travel between the TTB and the Dana 60s in the vans is probably the same as its the frame which severely limits up travel compared to vehicles inherently designed as 4x4.
This guy has an agile TTB Van and loves to use it: https://www.instagram.com/the_ridge_way/
If youre looking at doing a TTB swap see if you can find or talk to an owner of a Agile Offroad converted 4x4 van, theyve been successfully doing the TTB for years.
Travel between the TTB and the Dana 60s in the vans is probably the same as its the frame which severely limits up travel compared to vehicles inherently designed as 4x4.
This guy has an agile TTB Van and loves to use it: https://www.instagram.com/the_ridge_way/
Thread
Thread Starter
Forum
Replies
Last Post
Vegetable0
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
3
Aug 15, 2019 10:37 PM
vicp21
1968-Present E-Series Van/Cutaway/Chassis
5
Nov 4, 2012 02:37 PM
murrhee
1968-Present E-Series Van/Cutaway/Chassis
4
May 11, 2009 07:27 AM
propaneman
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
7
Aug 21, 2008 08:20 PM
oldhalftons
1968-Present E-Series Van/Cutaway/Chassis
1
May 13, 2004 04:46 PM
