When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My lights came in today, I see they include a Allen wrench, what is the proper installation of these bulbs? I would like to install them one time.
Do they only install one way? Does the flat part sit top/bottom? Or left/right? Can someone take a picture of them installed?
theres a bunch of threads with how to install these. They should be fine right out of the box. If I remember right, they need to be straight north and south.
I had to use the allen wrench on one bulb out of 4. But upon reflection after the install it may have been installer error.
But as stated, point the chips exactly to the 3 and 9 o'clock positions. The photo below is not Beamtech brand, but it's the same orientation.
I had to use the allen wrench on one bulb out of 4. But upon reflection after the install it may have been installer error.
But as stated, point the chips exactly to the 3 and 9 o'clock positions. The photo below is not Beamtech brand, but it's the same orientation.
yeah, that’s what I meant about north and south, you guys said it better. The chips are at 9 and 3.
