Heater box compatability?
Thread Starter
|
Senior User
Joined: Sep 2009
Posts: 117
Likes: 0
Heater box compatability?
Hey, fellas, quick question--Is the heater box in our '67-'72 trucks the same as the '66-'77 Bronco units? I was working on putting a new fan blower in my truck today and noticed how downright crusty the box was and got to searching, and it looks like nobody makes a new box for our trucks, but the bronco one looks exactly the same to my eye. I figured I'd ask you all before dropping $300 over at CJ Pony parts on the wrong thing.
Thanks!
Link to CJ Pony's Bronco box:
https://www.cjponyparts.com/dynacorn-heater-box-bronco-1966-1977/p/3720/?year=1972&gclid=Cj0KCQiAkfriBRD1ARIsAASKsQLQ_Ea5_ uSC2T-0Ftv0jUS6DAwjkNNRShxaScr6kj-74zFjB1m2oSUaAklREALw_wcB
Thanks!
Link to CJ Pony's Bronco box:
https://www.cjponyparts.com/dynacorn-heater-box-bronco-1966-1977/p/3720/?year=1972&gclid=Cj0KCQiAkfriBRD1ARIsAASKsQLQ_Ea5_ uSC2T-0Ftv0jUS6DAwjkNNRShxaScr6kj-74zFjB1m2oSUaAklREALw_wcB
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
C5TZ-18A484-A .. Heater Plenum Chamber / Reproduced: 1965/66 F100/1100 with deluxe fresh air heater; 1966/77 Bronco.
Here's a pic of the Bronco heater.
Mountain Pass
Joined: Jan 2018
Posts: 176
Likes: 1
From: comanche, texas
well crap....
I have a 67 and a 72 parts truck. my heater blower was going out so I swapped it with the 72. it works fine even tho the fan on the 72 is plastic and wider. I pulled the whole thing out and they look the same except for the heat resistor which lmc still offers for the 67. thought about rebuilding the 72 box for future use for the 67 but I guess not now. the 67 box is good still. only thing is the 67 is 2 speed and the 72 is 3 speed fan. this is ok correct?
sorry to hijack this thread...….
I have a 67 and a 72 parts truck. my heater blower was going out so I swapped it with the 72. it works fine even tho the fan on the 72 is plastic and wider. I pulled the whole thing out and they look the same except for the heat resistor which lmc still offers for the 67. thought about rebuilding the 72 box for future use for the 67 but I guess not now. the 67 box is good still. only thing is the 67 is 2 speed and the 72 is 3 speed fan. this is ok correct?
sorry to hijack this thread...….
Thread Starter
|
Senior User
Joined: Sep 2009
Posts: 117
Likes: 0
NumbersDummy, you are doing the lord's work, sir.
Thread
Thread Starter
Forum
Replies
Last Post
Slong1958
1967 - 1972 F-100 & Larger F-Series Trucks
1
May 7, 2018 08:36 PM
GM4WALLS
1973 - 1979 F-100 & Larger F-Series Trucks
23
Nov 11, 2014 05:03 PM
1964FORDTUF
1961 - 1966 F-100 & Larger F-Series Trucks
2
Jun 5, 2014 10:39 AM
