oil pan help needed
#1
oil pan help needed
have a 302 in my truck with a bad oil pan been brazed up some time and the dip stick is very hard to pull out and put in pulled the motor out to work on headers but want to find a different pan but having a hard time the dipstick goes into the pan
no hole in the block for stick here is a couple pictures of style I need thanks mike
no hole in the block for stick here is a couple pictures of style I need thanks mike
#2
The 1981-1984 302 truck motors had an oil pan that the dip stick went straight into, but that was on the drivers side. To me, it looks like someone made up the dipstick access on the pan on your truck. Regardless, you might look for the 302 truck oil pan with the sump in the rear and the dipstick access in the side of the pan. They are plentiful on ebay as long as you don't mind aftermarket and don't mind having the tube on the opposite side.
Chad
Chad
Thread
Thread Starter
Forum
Replies
Last Post
BadHabitinVA
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
02-06-2006 12:35 PM
solid dakota
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
8
07-19-2004 04:22 PM
pinegreen
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
11-15-2000 08:17 AM