Vent window

Reply Subscribe

Thread Tools

Search this Thread

Jan 22, 2019 | 08:30 PM

Broncor

Thread Starter

Mountain Pass

Joined: Feb 2018

Posts: 192

Likes: 1

From: DEWINTON Alberta

Vent window

Passanger vent window handle broke off almost flush to frame around window.
it is not a matter of a new handle, I have the handle but the actual shaft it goes onto is broke right off.
tried a round of JB weld but that has already failed.
From what I can see it looks like I have to find a whole new vent window frame and all.
Any other fixes or suggestions would be great and much appreciated.

Last edited by Broncor; Jan 23, 2019 at 07:59 AM. Reason: Spelling

Jan 22, 2019 | 10:48 PM

ZombieF150

Elder User

Joined: Sep 2018

Posts: 735

Likes: 8

From: NC

Maybe this might help? Looks like it might have all you need.

https://shop.broncograveyard.com/198...ctinfo/34304R/

Jan 23, 2019 | 12:28 AM

TexasGuy001

Hotshot

Joined: Sep 2001

Posts: 11,958

Likes: 228

I believe the vent window has to be replaced. It would probably be easier to replace the whole assembly, but you could probably drill out the rivet and replace the window if you really wanted to.

Jan 23, 2019 | 06:09 AM

95fiveoh

Elder User

Joined: Nov 2016

Posts: 904

Likes: 3

From: Pittsburgh

The one on the drivers side of my truck was broken off when I got it. I replaced the entire vent window and frame. It cost something like $15 at a u-pull-it junkyard.