Replacing front end components
Thread Starter
|
New User
Joined: Jun 2018
Posts: 5
Likes: 0
Replacing front end components
Hey guys, I've got a 2008 F250 SuperCab XLT long bed 4x4 and I'm looking at replacing the front end steering components to include all ball joints, tie rod ends, tie rod sleeve, steering dampers, U-joints, and track bar. I was wondering if I could get some suggestions on the preferred manufacturer for each of the parts for a truck that is a dailt driver through the week and a weekend mud warrior. I know these parts are common fail parts on these trucks, just looking for the best quality to help lower the frequency of replaceing them. Any help would be greatly appreciated, thank you.
Moderator
Joined: Aug 2002
Posts: 6,104
Likes: 384
From: Southern California
I just rebuilt the front end on my wifes 79 Cougar Sport......after doing a lot of research I went with Moog professional line....no thermoplastic stuff, some of the components were stamped "TRW"... all good quality imho.
Thread
Thread Starter
Forum
Replies
Last Post
Anthony Polsinelli
1999 - 2003 7.3L Power Stroke Diesel
17
Apr 7, 2024 09:15 PM
