is this a pcv valve
Senior User
Joined: Jan 2010
Posts: 279
Likes: 4
From: Morton, WA
For a reference with photos . . . .
I do not know how to link a previous thread to your thread, but if you look at threads I have started, one of mine titled “A crankcase ventilation question” shows photos of the setup that had been put onto my draft tube and canister. I have also included some part numbers for the new oil fill cap and a new mesh screen for the canister. BUT, several replies to that thread suggested that I scrap the original draft tube and fit a newer PCV into a valve cover and route it to a vacuum fitting on either the intake manifold or the carburetor. (Carburetor figment worked better.)
Post Fiend
Joined: Feb 2008
Posts: 5,831
Likes: 121
From: St Albert, Alberta
Bill found you one all you have to do is make the call.
