Pulling injectors
#5
I used a small prybar under the top portion of the hold-down plate to pop them loose.
It was the middle sized one from this set that worked great: https://www.harborfreight.com/3-pc-p...rip-60682.html
It was the middle sized one from this set that worked great: https://www.harborfreight.com/3-pc-p...rip-60682.html
Thread
Thread Starter
Forum
Replies
Last Post
otpracer100
1994.5 - 1997 7.3L Power Stroke Diesel
18
10-16-2008 08:25 PM
MagKarl
1994.5 - 1997 7.3L Power Stroke Diesel
7
06-19-2007 09:54 AM