Not yet high speed, but definitely low drag
#1
Not yet high speed, but definitely low drag
Hello from the desert of Phoenix, AZ! I picked up my 1995 XLT about 3 years ago, with 68,000 miles on it, and have been busy tinkering away on it ever since. It's an auto with the stock 302. The suspension set up is a 4/5 drop using a combination of DJM's Dream Beams, Belltech 2" lowering springs and a rear axle flip. All sitting on a set of 20"x9.5" Vision wheels and 255/45/20 rubber. I've always loved the look of old school shop trucks so, I decided to start building my own.
Doing the work myself would have been a much tougher challenge without a great forum like this so, thank you to all for the information and resources you provide.
Keep On Trucking!
Doing the work myself would have been a much tougher challenge without a great forum like this so, thank you to all for the information and resources you provide.
Keep On Trucking!
Thread
Thread Starter
Forum
Replies
Last Post
bradshaw6243
General NON-Automotive Conversation
39
08-02-2007 07:15 PM