P02CD Code
Thread Starter
|
New User
Joined: Aug 2015
Posts: 10
Likes: 0
P02CD Code
Check engine light came on and code P02CD is what was brought up. Truck runs ok but when hooked to our goseneck with a load doesn't seem to have as much power. It also showed Fuel Air Metering. Can't gind much
Logistics Pro
Joined: Mar 2005
Posts: 3,527
Likes: 2,491
From: West Michigan
A Quick google search turned up a couple of matches
https://www.ford-trucks.com/forums/1...dte-p02cd.html
Truck has a P code with no effective issues : P02CD : - Ford Powerstroke Diesel Forum
sounds like you may have a bad injector?
https://www.ford-trucks.com/forums/1...dte-p02cd.html
Truck has a P code with no effective issues : P02CD : - Ford Powerstroke Diesel Forum
sounds like you may have a bad injector?
Thread Starter
|
New User
Joined: Aug 2015
Posts: 10
Likes: 0
Truck is a 2011 F350 with 150,000 miles. Only notice a reduction in power when pulling a 35'goose with about 9000 lbs in. When not hooked up truck seems to run fine. Everything is stock. Everything I find on that code seems to talk about gas trucks.
Logistics Pro
Joined: Mar 2005
Posts: 3,527
Likes: 2,491
From: West Michigan
The two links I provided in my prior post were both diesel related. You probably wouldn't notice the derate in power not towing. Probably going to have to have a shop take a peek. If an injector is going bad, the new one's serial number has to be programmed into the computer.
P02CD - Cylinder 1 Fuel Injector Offset Learning at Maximum Limit
P02CD - Cylinder 1 Fuel Injector Offset Learning at Maximum Limit
Lead Driver
Joined: Mar 2010
Posts: 5,504
Likes: 256
From: Woodbridge, Ontario, CA
Has an EGR cooler ever been replaced on this truck at any point in time? I once had a truck that had one replaced in its repair history seeping coolant from the bypass valve to cooler housing gasket, onto the top of cylinder #1 injector causing a dead miss. I don't remember if it set that particular trouble code though.
Thread
Thread Starter
Forum
Replies
Last Post
