Stalling when coming to a stop

Reply Subscribe

Thread Tools

Search this Thread

Jun 14, 2018 | 05:03 PM

Breeze210

Thread Starter

New User

Joined: Jun 2018

Posts: 2

Likes: 0

Stalling when coming to a stop

My 2009 Ford E-250 with the 4.6 stalls every now and then when coming to a stop. I’ve recently had the spark plugs and fuel filter changed as well as all the o2 sensors. I even changed out the Egr but no luck, still stalling after everything. Only codes it’s throwing now are P0442 and P0456. P0442 has been on for at least a year and P0456 has only recently come on. I’ve changed gas cap as well. What else can I do?

Jun 15, 2018 | 03:38 PM

maples01

Lead Driver

Joined: May 2004

Posts: 5,033

Likes: 137

From: Maryville

Time for a new IAC, luckily it's on the rear of the intake, easy to get with the doghouse off.

Jun 15, 2018 | 04:35 PM

Breeze210

Thread Starter

New User

Joined: Jun 2018

Posts: 2

Likes: 0

Thanks so much! Going to by part tonight and install it. Do I have to remove engine cover inside cab to access it or is it all under hood behind air intake?

Jun 15, 2018 | 09:28 PM

maples01

Lead Driver

Joined: May 2004

Posts: 5,033

Likes: 137

From: Maryville

It's on the back of the engine, you gotta remove the doghouse, it's top center, the silver part with the large hose that looks like it has a filter on it coming from the drivers side.

Jun 16, 2018 | 03:44 PM

CWR032

Junior User

Joined: Oct 2016

Posts: 69

Likes: 0

...Is someone laying on the floor with the front seats removed in that picture?

Jun 16, 2018 | 04:14 PM

maples01

Lead Driver

Joined: May 2004

Posts: 5,033

Likes: 137

From: Maryville

No, I have a power seat base that slides it back 3 feet and raises it up to the height of my wheelchair, I just retracted it back and sat in the floor, was leaning over and my leg pulled me out of the chair actually, so I just sat and finished the job, took the photo before getting back in the chair.