high beam indacator
Thread Starter
|
Freshman User
Joined: Nov 2002
Posts: 44
Likes: 0
From: fawn grove pa
high beam indacator
well guys try this one!!! when I turn on the head lights my high beam indicator stays lit in the dash and the head light beams go a little dim (BUT NOT BY MUCH) I have replaced the bulbs and the switch on the dash! I have not replaced the dimmer switch yet I just figured I would throw at the board and see what happened. Anyone else have a simalar promblem.I told it might be a ground. I dont know I will change the dimmer switch and see what happens.Just thought I would see what opinions you guys have. thanks 
Junior User
Joined: Feb 2003
Posts: 86
Likes: 0
From: Newmarket, Ontario, Canad
high beam indacator
I hit my high beam switch one night while out snowplowing and everything went black.
After checking fuses and just about everything else, it turned out to be my floor high beam switch. It looked fine, but further inspection showed it was completely rotted out on the bottom.
After checking fuses and just about everything else, it turned out to be my floor high beam switch. It looked fine, but further inspection showed it was completely rotted out on the bottom.
