I have an '04 Excursion that the PO bulletproofed and was running some sort of Edge product judging by the Edge EGT probe that is still installed. I just got in my PHP FICM programmer, but the connection for the EGT probe that it has is a 2x2 plug, where the EGT probe already installed is 3x2 with the top center square blank. I've searched and can't figure out what part that is from Edge. I think I'm pretty much boned and need to purchase Edge's legacy EGT probe that is 2x2. Is there any chance that someone has any insight or solution to this very specific problem? Can the 3x2 plug be jacked with to work with the 2x2? I really have nothing to lose, so some fiddling around with the wires may be in order, especially since this will harm nothing besides the probe I probably need to replace anyways.

 

Well it looks like it's the Edge 98601 for the Insight and is non-expandable. I'll see if I can find its manual and look for some schematics but it's looking like a bust. Anyone need an Edge 98601 probe?