Tpms

Reply Subscribe

Thread Tools

Search this Thread

Feb 25, 2018 | 12:59 PM

brandon.edwards

Thread Starter

Senior User

Joined: Jun 2012

Posts: 254

Likes: 0

Tpms

Tpms sensor question.....I got new wheels and tires yesterday and the tire pressure sensors seem to be outta whack. They tried reprogramming them and it’s showing the fronts on the rear at 65-68psi and vice versa with 80-83 psi in the front. Seems to me it matters where each sensor goes?

Feb 25, 2018 | 01:42 PM

UGA33

Lead Driver

Joined: Sep 2006

Posts: 5,663

Likes: 162

From: Cartersville, Ga

They relearn their new position when you rotate the tires. I've never had to reprogram them, they just did it on their own.

Feb 25, 2018 | 02:39 PM

Redrockerstl55

Fleet Mechanic

Joined: Aug 2017

Posts: 1,274

Likes: 26

From: St Louis Suburbs

I have had all kinds of problems with my TPMS sensors...the dealer told me I needed to have the truck relearn the new positions.

Here is a short video showing you how it's done assuming the OP has pushbutton start.

Feb 25, 2018 | 02:46 PM

kylant

Fleet Mechanic

Joined: Sep 2016

Posts: 1,613

Likes: 156

just drive it. they will relearn their positions after several miles. there is no need to go through the air down/air up procedure

May 1, 2018 | 10:06 PM

paydirt

5th Wheeling

Joined: Jan 2018

Posts: 44

Likes: 0

From: Texas

Quote:

Originally Posted by kylant

just drive it. they will relearn their positions after several miles. there is no need to go through the air down/air up procedure

Have you confirmed this? I hope you are right. About to swap my Platinum wheels for Lariats. Going to have to pull my sensors and put them in the Lariat wheels. Hoping they can be swapped without issue.