frame swap need advice
Thread Starter
|
Junior User
Joined: Jan 2016
Posts: 52
Likes: 0
frame swap need advice
Ive got a 1992 f150 4.9 ext cab sitting on 35's currently that I was planning on doing a 6bt and SAS...but I am afraid that the frame will have issues. Recently a friend gave me a f350 with no tranny or motor, but still has the front and rear axles. my question is can my ext cab f150 fit on a regular cab f350 frame? The truck is in near pristine condition.
Lead Driver
Joined: May 2011
Posts: 5,803
Likes: 456
It is not a direct swap, although with fab skills you can make anything work (in this situation, a lot of work).
what power level are you interested in for your f150? It's very highly likely that a 4bt is a better choice and just leave the frame alone.
what power level are you interested in for your f150? It's very highly likely that a 4bt is a better choice and just leave the frame alone.
Thread Starter
|
Junior User
Joined: Jan 2016
Posts: 52
Likes: 0
sorry, I was more PC about this stuff when I was in my early 20’s. If I can afford it nowadays... I drive it although I tend to always end up with a Ford... have had a 79 Bronco for over 15 years
Thread
Thread Starter
Forum
Replies
Last Post
