Help!
Thread Starter
|
New User
Joined: Feb 2018
Posts: 6
Likes: 0
Help!
I just did an oil change. Filter and oil and also changed my air filter and gave the mass a qwick spray with mass cleaner .
now truck has a ruff idiel and stalls once in awhile .engine light is on and has all these codes P0012
0022
P0345
0106
P0307 cyl 7misfire
0012
run perfect before i did the work tia
now truck has a ruff idiel and stalls once in awhile .engine light is on and has all these codes P0012
0022
P0345
0106
P0307 cyl 7misfire
0012
run perfect before i did the work tia
Fleet Owner
Joined: Apr 2008
Posts: 24,323
Likes: 5,132
From: 0,0,1
First make sure you didn't break the tiny wire running inside the hole of the MAF sensor, then make sure the connector is on correctly. Next try disconnecting the battery for a few minutes to clear out the learned programming. The ECM might be trying to run the engine on old information from the MAF.
Thread
Thread Starter
Forum
Replies
Last Post
