I did the auto the 5 speed swap about 4 months ago. Everything has been great but I can not get my cruise to work. I used my auto pcm and used my auto transmission wiring harness, left the transmission range selector switch plugged into the harness and left it in the park position so it'll start by the key. I knew my cruise wouldn't work like this. Anyone know what I have to do to get it to work again? Almost for got I left my clutch saftey switch jumper plugged in.

 

Best solution would be a manual PCM. If you study the TRS connector and what contacts open/close in what positions, you _might_ be able to wire it so the starter will run by the key, and the PCM will think the ghost transmission is in Drive.