If anybody is running 38 in tires could measure from the top of your cab to the ground and let me know how much lift you have i would be great full, hope fully there are a few on here. Just need to know over all height, THANKS Gary.

 

I can probably get this for you tomorrow.

 

Trying to figure out if it will fit in the garage with the new tires? lol

 

With 5" lift and 37's I was 6'10" no marker lights.

 

LMAO!!! I told myself when i was typing it you would post something, you did not disappoint me. LOL THANKS to all that reply. Yes, it has 33's now, the boy want to go taller, i told him we could go 35 but anything over that it wont fix in my shop, and nothing gets parked outside here, im kinda fruity. LOL! THANKS ALL!!!!!!!!!!!!

 

My buddy just measured his highboy which has 4" skyjacker springs and 38's. He said it's roughly a inch or so over 7' with no cab lights. Probably not what you want to hear if you have a 7' door.

 

Mine was a little stuffed but this what it looked like.


I miss that truck.

 

Nothing wrong with that

 

About 7'1"-7'2" with a 6" lift on 38.5" TSLs. 78 F250.

 

33's to 35's not bad and should still have pretty good street manners for the boy. I am glad I did not disappoint you. lol

Or go 38's, move the header above the garage door up and add another panel to the bottom of the door. And then of course move the tracks and then temp your fate with the roll up spring death machine.. Problem fixed. lol

 

When will you be here here to move the header up? Party at my place coming this summer i guess. LOL!!!!!!!!!!!!!! Thanks every one that replied.

 

Sawzall, some long demo blades and 5 batteries in the bag. Waiting to put the address in the GPS to get to MI. I go north and then easterly right? lol

Do not mod the current garage, just build a new 2 truck taller one! Tall boy (8' or 10' side wall) carports are cheap, quick to put up and closed in easy enough.

 

Mine stands at 82" with 2" lift and 33's, i dont know how your buddy's truck is only 2" taller with a 4" lift and 38's. My shop door is 7' so i told him that i think 4" lift with 35's should be enough. Thats a dam nice looking truck though, like it. Thanks again to all that helped, Even Rich who is now lost some where in Indiana. LOL!!!!!!!!!!!

 

Sorry! I wasn't there when he measured it lol. I'm pretty sure he can read a tape measure but I agree now that you said something. I shoulda measured mine they're kinda close.