When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello all, 74 f100 shortbed, on the inside d/s about where a shoulder belt might mount there is about a 1 1/2" round opening flanked on either side by screw holes, and a connector with 4 wires sticking out. Doesn't seem to be reinforced in any way (like I would think if it was for a belt), and the p/s of the trucks doesn't have this. So question of the day, what's it for?
Thanks as always for your help☺.
Do you have a light on the backside of your cab facing into the pickup bed?
That location you describe is likely the switch for that bed light.
Easily obtained from JY or vendors.
Tbruz
'74 F100: On the inside d/s (drivers side) about where a shoulder belt might mount there is about a 1 1/2" round opening flanked on either side by screw holes, and a connector with 4 wires sticking out.
D4TZ-15443-A (replaced D3TZ-15443-B) .. Cargo Lamp Switch & Bezel / Marked: D3TB-15N562-AA or D4TB-15N562-AA / Obsolete ~ 251 available NOS
Thanks guys, my whole life has revolved around vintage Mustangs for the last 35 years, and now I feel like such a noob hahaha. The help is greatly appreciated.
