Seatbelt light/buzzer not functioning
My 83 F150 is a base model no-power-anything truck and is relatively new to me having purchased it last August. I've been going through a few things and repairing a bit at a time. I'm wondering if it doesn't have the seatbelt warning system installed.
The shop manual states that only the Dual Spool and Continuous Loop systems have the warning system. Perhaps I'm reading it wrong. Being a base model, I don't know what was installed at the factory. Perhaps the gurus could set me straight as to what I have, and how to repair it? Like, where does one find a 'Thermal Timer Buzzer'... Thanks.
My 83 F150 is a base model no-power-anything truck and is relatively new to me having purchased it last August. I've been going through a few things and repairing a bit at a time. I'm wondering if it doesn't have the seatbelt warning system installed.
The shop manual states that only the Dual Spool and Continuous Loop systems have the warning system. Perhaps I'm reading it wrong. Being a base model, I don't know what was installed at the factory.
D6AZ-10B924-B .. Seat Belt Warning Indicator Switch - Marked: D7AB-10B924-A1A or A2A (Motorcraft SW-1387) / Obsolete ~ 30+ Available NOS
Located behind the dash above the glove box, see 10B924 in pic at upper left.
1980/83 F100/350; Bronco & Econoline / 1983 Ranger // 1976 LTD/Torino from 7/1/1976 / 1977 LTD/LTD II.







