...i however need the passenger side....but this gets the point across.
dana 60 knuckles
Thread Starter
|
Junior User
Joined: Mar 2016
Posts: 58
Likes: 0
From: Red Oak, TX
yeah i hear ya....those were my first stops....you would think these things are made out of gold as hard as they are to find. at this point im hard up enough that if someone was about to do a d60 swap i would pay them to send me there knuckle to have machined and then send them my stock one once i swapped them. ya its getting that bad.
Fleet Mechanic
Joined: Feb 2008
Posts: 1,645
Likes: 4
Dude! Your in TX!? That is the F series capitol of the world! You cant find soneone parting out an f350??
In all seriousness I'll keep an eye out too. Honestly theres probably more junk rotted incomplete f350s here than there..
In all seriousness I'll keep an eye out too. Honestly theres probably more junk rotted incomplete f350s here than there..
Cargo Master
Joined: Nov 2010
Posts: 2,797
Likes: 10
I apologize for leading you the wrong way. I do not know what I was confusing between the two. Good luck on finding a set!
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Thread Starter
|
Junior User
Joined: Mar 2016
Posts: 58
Likes: 0
From: Red Oak, TX
no biggy bud. i wish it was so.
coreyallen01...im actually in north texas at that. but i spent an afternoon in the phone book calling every listed junk yard in the DFW area and i found a ton of 97 f350s right up till i told them i needed a 4 wheel drive and thats when i go the big ol no. i was for sure this was going to be a dime a dozen part that wouldn't take me an hour to find. boy was i wrong!
coreyallen01...im actually in north texas at that. but i spent an afternoon in the phone book calling every listed junk yard in the DFW area and i found a ton of 97 f350s right up till i told them i needed a 4 wheel drive and thats when i go the big ol no. i was for sure this was going to be a dime a dozen part that wouldn't take me an hour to find. boy was i wrong!
Fleet Mechanic
Joined: Feb 2008
Posts: 1,645
Likes: 4
no biggy bud. i wish it was so.
coreyallen01...im actually in north texas at that. but i spent an afternoon in the phone book calling every listed junk yard in the DFW area and i found a ton of 97 f350s right up till i told them i needed a 4 wheel drive and thats when i go the big ol no. i was for sure this was going to be a dime a dozen part that wouldn't take me an hour to find. boy was i wrong!
coreyallen01...im actually in north texas at that. but i spent an afternoon in the phone book calling every listed junk yard in the DFW area and i found a ton of 97 f350s right up till i told them i needed a 4 wheel drive and thats when i go the big ol no. i was for sure this was going to be a dime a dozen part that wouldn't take me an hour to find. boy was i wrong!
Cargo Master
Joined: Jul 2015
Posts: 3,076
Likes: 21
From: Aransas Pass, Tx
I will keep my eye out in the tyler area too.
If you find something in Longview, Tyler, or the surrounding area, just let me know and I can swing through and check it out for you. I make semi-weekly trips to Plano to visit the girlfriend so I could meet up pretty much any time
If you find something in Longview, Tyler, or the surrounding area, just let me know and I can swing through and check it out for you. I make semi-weekly trips to Plano to visit the girlfriend so I could meet up pretty much any time
Thread Starter
|
Junior User
Joined: Mar 2016
Posts: 58
Likes: 0
From: Red Oak, TX
I mentioned this thougth earlier but if there is anyone about to do a Dana 60 swap i would gladly pay the shipping to me and compensate them for there time and trouble if they were willing to send me a knuckle i could have machine and then i would pay the return shipping to send them my knuckle once i swapped them.
i spent about an hour on the phone calling all the places on car-parts.com but came up dry.
i spent about an hour on the phone calling all the places on car-parts.com but came up dry.