Just bought 3rd Excursion need advise
Thread Starter
|
Fleet Mechanic
Joined: Mar 2013
Posts: 1,576
Likes: 41
From: Wyoming
Local pick and pull has a non PI motor that has a good block for $95.
I think I will get that short block and rebuild with non PI pistons.....take my heads to be reworked and rebuild as a non PI block with PI heads.
Compression ratio should be about 9.5:1 or so.
Maybe I could use forged pistons and finally start my twin turbo build. With front end off to pull motor it should be a little easier.
I think I will get that short block and rebuild with non PI pistons.....take my heads to be reworked and rebuild as a non PI block with PI heads.
Compression ratio should be about 9.5:1 or so.
Maybe I could use forged pistons and finally start my twin turbo build. With front end off to pull motor it should be a little easier.
Thread
Thread Starter
Forum
Replies
Last Post
jtging
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
5
Jul 12, 2018 05:25 AM
rat49f6
1994.5 - 1997 7.3L Power Stroke Diesel
2
Jul 10, 2012 09:38 AM
