While getting a jump, had someone cross poles on my 2012 XLT (I know that I should have handled it myself, hindsight...). After fixing the bulbs, BCM, all manner of fuses, I am left with one problem.

When I turn the 4x4 **** to high and low, I receive a "check 4x4" on the dash, and no 4x4. The e-locker, still working.

Other forums pointed (heavily and convincingly) to the Transfer Case Solenoid. I just replaced that, and still no 4x4. I rechecked fuses again (purposefully redundant) and still nothing.

I will take it in of course if I can't figure it out, but, any ideas?

Apologies if this is in the wrong spot.