What size carb?
Thread Starter
|
New User
Joined: Aug 2003
Posts: 8
Likes: 0
What size carb?
I have a 78 Bronco (work in progress). I am haveing some trouble finding the right carb to use.
I have a 460 (board 30 over) Miling rv came (light pull). I have had a 600 and a 750 Holley on it so far but not saticefied. (it bogs to much) any thoughts?
I have a 460 (board 30 over) Miling rv came (light pull). I have had a 600 and a 750 Holley on it so far but not saticefied. (it bogs to much) any thoughts?
Freshman User
Joined: Jun 2003
Posts: 33
Likes: 0
What size carb?
If it stumbles under light accel the you can do the following:
1. Open Idle Mixture screws
2. Readjust butterfly position
3. Raise Float Level
If it stumbles under hard accelartion increase your squirter size to a 35 and readjust butterflies.
If it just stumbles at part throttle....increase your jetting.
What do your plugs look like?
1. Open Idle Mixture screws
2. Readjust butterfly position
3. Raise Float Level
If it stumbles under hard accelartion increase your squirter size to a 35 and readjust butterflies.
If it just stumbles at part throttle....increase your jetting.
What do your plugs look like?
