Sliding Window removal
Thread Starter
|
Senior User
Joined: Jul 2015
Posts: 106
Likes: 0
Sliding Window removal
I've searched the forums but cant find how to remove the sliding glass panels only.
They work perfectly but they rattle so I want to take them out, replace the felt and reinstall, just no idea how to.
They work perfectly but they rattle so I want to take them out, replace the felt and reinstall, just no idea how to.
Laughing Gas
Joined: Apr 2016
Posts: 858
Likes: 118
From: Buffalo NY
You must remove the window from the truck. Remove screws holding the frame together and the sliding panels will come out. As for the felt,I got mine from Speedway Motors.com. It is listed as "glass run channel".
FTE Chapter Leader
Joined: May 2001
Posts: 3,322
Likes: 20
From: Rhode Island
Taking the window out is a snap... Grab big hammer...
kidding....
seriously its simple. Grab a buddy (the wife is always good for this) a couple flat blade screw drivers, start at any top corner. use the screw drivers to roll the rubber down from the inside of the truck while applying pressure to the window. once you have enough rubber rolled down the window will practically fall out.
kidding....
seriously its simple. Grab a buddy (the wife is always good for this) a couple flat blade screw drivers, start at any top corner. use the screw drivers to roll the rubber down from the inside of the truck while applying pressure to the window. once you have enough rubber rolled down the window will practically fall out.
Thread
Thread Starter
Forum
Replies
Last Post
reidhunt
1983 - 2012 Ranger & B-Series
4
Oct 19, 2007 07:24 PM
302FORDF100
1973 - 1979 F-100 & Larger F-Series Trucks
5
Aug 1, 2005 10:50 AM
