Blower Motor Headaches
Thread Starter
|
New User
Joined: Jan 2002
Posts: 6
Likes: 0
Blower Motor Headaches
Hi all. Desparately need some help. Here is the problem:
My heater / blower motor is stuck in the low position. I have replaced the switch, the ballist resistor and the blower motor. It is still stuck on low. Up until a few weeks ago it was stuck on high, which was fine with me. I checked the current with a multi-meter and I am getting current through all the connections. I am getting heat but since it is stuck on low it takes forever to get the entire truck warm. Am I missing something? I would appreciate any help. Thanks in advance.
My heater / blower motor is stuck in the low position. I have replaced the switch, the ballist resistor and the blower motor. It is still stuck on low. Up until a few weeks ago it was stuck on high, which was fine with me. I checked the current with a multi-meter and I am getting current through all the connections. I am getting heat but since it is stuck on low it takes forever to get the entire truck warm. Am I missing something? I would appreciate any help. Thanks in advance.
