SP2P Performer 2V intake
Posting Guru
Joined: Dec 2002
Posts: 2,003
Likes: 2
From: chicago burbs
SP2P Performer 2V intake
it's touted as an economy/ performance intake. the runners are very small to promote low speed velocity. the 4 bbl carb flange is somewhat contradictory. should be a good choice for low end torque and fuel economy, but if it's a lot of power you're after, probably not.
Thread Starter
|
Freshman User
Joined: May 2002
Posts: 37
Likes: 0
From: Minnesota
SP2P Performer 2V intake
Posting Guru
Joined: Aug 2000
Posts: 1,127
Likes: 3
From: (near) Denver USA
SP2P Performer 2V intake
That SP2P 2V manifold was originally marketed as a gas mileage enhancement more than a performance improvement. The ports are very small, quite a bit smaller than the stock manifold. The carb mounting flange is a nightmare, as well.
I wouldn't recommend that manifold for any application where power is important. In fact, I wouldn't recommend it unless you needed to fill space in a museum.
I wouldn't recommend that manifold for any application where power is important. In fact, I wouldn't recommend it unless you needed to fill space in a museum.
