Braking Question
Thread Starter
|
Elder User
Joined: Jan 2003
Posts: 539
Likes: 0
Braking Question
Does anyone know if the brake rotors on my '88 F150 4x4 are seperate from the hub, or do I have to remove the auto hubs to get them off?
I am starting to get ready to do a 4-wheel brake job and that is the only question I have left to be answered.
Any info or advice is appriciated.
P.S. I am not replacing the autohubs at this time, so If they have to come off, they will go back on too. The haynes manual does a good juob explaining the steps to do the brake job, but lack the info on what years the rotors were intergrated with the hubs.
Thanks in advance.
I am starting to get ready to do a 4-wheel brake job and that is the only question I have left to be answered.
Any info or advice is appriciated.
P.S. I am not replacing the autohubs at this time, so If they have to come off, they will go back on too. The haynes manual does a good juob explaining the steps to do the brake job, but lack the info on what years the rotors were intergrated with the hubs.
Thanks in advance.
