Nevada July BS Thread
Thread Starter
|
Logistics Pro
Joined: Feb 2011
Posts: 4,841
Likes: 9
From: Stagecoach, NV.
Welcome to the board.
I don't know anything about the 7.3's, except that they are supposed to be better than the 6.0's & seem to be highly sought after when people are looking to buy a truck.
Unfortunately, there haven't been any big Chapter GTG's anywhere in NV since I've become CL. I've tried to put one together, but with the economy, work schedules & finding a central NV location for everyone to meet at, made it difficult as most of us would not have been able to attend. We have found that it tends to be alot easier to have small GTGs with other members that live nearby or are passing through our areas. GTGs doesn't have to be big, all it takes is 2 or more members to meet up for coffee or whatever.
I know that there have been numerous small GTGs in the Vegas area though.... helping each other move, helping repair vehicles, meeting at car shows, etc. If you're ever in the Reno, Carson City, Dayton, Tahoe, Fernley or Fallon area...please let me know. I'm near the crossing of Hwy 50 east & Hwy 95. I would be happy to have a small GTG & meet you.
Thread Starter
|
Logistics Pro
Joined: Feb 2011
Posts: 4,841
Likes: 9
From: Stagecoach, NV.
Morning guys
Happy Saturday!
Hmm... work or poker run? I'm thinking poker run, but I don't want to leave my boss hanging either. Damn, I hate tough decisions! He depends on me to be there.
He hired me for 2 days a week & I've been working every single day since I started with only 4 days off. Poker run or not, I really NEED a day for myself. I think I'm going to try to take the day off & if he doesn't like it.... than I'll remind him that he still has to pay me for the other 5 unscheduled days per week I've worked for almost 2 months!
Maybe I'll just go in around 2pm after the poker run instead.
Have a great day
Happy Saturday!
Hmm... work or poker run? I'm thinking poker run, but I don't want to leave my boss hanging either. Damn, I hate tough decisions! He depends on me to be there.
He hired me for 2 days a week & I've been working every single day since I started with only 4 days off. Poker run or not, I really NEED a day for myself. I think I'm going to try to take the day off & if he doesn't like it.... than I'll remind him that he still has to pay me for the other 5 unscheduled days per week I've worked for almost 2 months!
Maybe I'll just go in around 2pm after the poker run instead.Have a great day
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Senior User
Joined: Aug 2011
Posts: 182
Likes: 0
need help
Need some help on this one.
the problem is and was that the starter will not engage. I can here it spinning but it is not grabbing. I have done the following.
1. replaced starter from autozone. no luck
2. replaced the cable going from the selinoid to the starter. it had bare spots.
3. replaced the start selinoid.
4. checked the teeth on the fly wheel as far as i can get my big fat fingers up into the hole. (size 12.5 ring is way to small for my fat fingers)
5. checked the voltage. which i am getting 12.5 volts off the battery and at the the seliniod
HELP PLEASE
the problem is and was that the starter will not engage. I can here it spinning but it is not grabbing. I have done the following.
1. replaced starter from autozone. no luck
2. replaced the cable going from the selinoid to the starter. it had bare spots.
3. replaced the start selinoid.
4. checked the teeth on the fly wheel as far as i can get my big fat fingers up into the hole. (size 12.5 ring is way to small for my fat fingers)
5. checked the voltage. which i am getting 12.5 volts off the battery and at the the seliniod
HELP PLEASE