No start have pids, Need Help
Thread Starter
|
New User
Joined: Jun 2016
Posts: 1
Likes: 0
No start have pids, Need Help
Hi everyone, I have an 06 ccsb that won't start. Had p2285 code so I removed the ficm and checked all the wires and everything looked good. Hooked up my scanner to check these pids, ficm VP - 10 to 12 , ficm mp- 46.5 to 48, ficm lp- 10 to 12, ipr% 84.7, cmp ckp sync was back and forth yes no, ficm sync- yes and fpw- 4400 to 5128, icp 600psi. Any ideas on what's going on or what else I can check? P2285 code hasn't came back since I reinstalled ficm. Thank-you
Fleet Mechanic
Joined: Jan 2012
Posts: 1,841
Likes: 6
Hopefully a mod will be by soon and can move this to the 6.0 forum. What jumps out me is these 2 things, ipr% 84.7, cmp ckp sync was back and forth yes no. Ipr shouldn't be this high and once cam and crank sync they should stayed synced.
Thread
Thread Starter
Forum
Replies
Last Post
