Still no start
Thread Starter
|
New User
Joined: Feb 2006
Posts: 20
Likes: 0
Still no start
well i still have a no start had icp code so replaced sensor clean up wire and conector code has cleared .put in blue spring kit motor seems like its trying but wont better after blue sping but no start .48.3 volts at ficm i have a banks I Q and my fuel presure is only .6 to .7 and ithas a multiply of 1000 i think im looking at a failed hpop is there a code or no code,
oh yeah 6.0 03 excursion 171000 miles
oh yeah 6.0 03 excursion 171000 miles
Last edited by tjbjeepn; Jan 21, 2013 at 12:42 PM. Reason: add more info
Elder User
Joined: Oct 2006
Posts: 874
Likes: 4
From: mckenna wa
I have not seen your other post but. What is your ICPv and ICP when your trying to start the truck? ICPV koeo. Also your IPR readings. if your HPOP failed I would imagine you would get a low icp code.
Elder User
Joined: Oct 2006
Posts: 874
Likes: 4
From: mckenna wa
Do u have a way to monitor these numbers like a scangauge II OR AN AUTO ENGINUITY? This will tell us if you are building high pressure oil to fire your injectors. We are looking for 500 psi icp to start
Thread
Thread Starter
Forum
Replies
Last Post
