U joint help
Cargo Master
Joined: Jun 2005
Posts: 3,045
Likes: 21
From: The Ole' North State.
I agree with Nothing Special. However Bronco Graveyard has them: Dana 50 Front Axle u joint.
Dana 50 Axle U-Joint-Broncograveyard.com
Dana 50 Axle U-Joint-Broncograveyard.com
New User
Joined: Mar 2006
Posts: 9
Likes: 0
From: NorthEast Ohio
I have a 1994 F250 4x4 and just replaced my front axleshaft U-joints with Spicer 5-1350X's. I got mine from Amazon w/ 2 day delivery ...non-greaseable with external snap rings and they look much stronger than the AutoZone ones I took back. Directions say do not add grease during installation. Came with 3 thicknesses of snaprings. The thinnest(coppper) JUST fit. The one thing I found that helped was to square up the bottom of the snap ring groove with a Dremel tool using the little cut off wheel. That corrosion that rounds in the bottom will keep the ring from being able to seat. I used a HF ball joint press to press them in and out. If yours don't have 22 years of Great Lakes winters on them maybe they'll be easier.
Laughing Gas
Joined: Feb 2016
Posts: 903
Likes: 119
Hell yeah, my hf press has pressed many times more suspension bolts and U joints than it has ball joints. Sometimes the U joint caps explode which always makes it exciting.
Thread
Thread Starter
Forum
Replies
Last Post
Greatwhite94
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
5
Jan 22, 2017 08:51 PM
metalmilitia
1973 - 1979 F-100 & Larger F-Series Trucks
3
Mar 16, 2003 07:19 AM
