Hydro boost leaking pics tool modification
Fleet Mechanic
Joined: Oct 2007
Posts: 1,712
Likes: 18
From: Henderson, NV
Sorry I'm confused. I thought you were talking about the hydroboost unit that's behind the master cylinder. If you are referring to the power steering pump I haven't had to wrench on that yet ( knock on wood... lol) .
Thread Starter
|
Hotshot
Joined: Apr 2010
Posts: 19,056
Likes: 236
From: Saratoga Springs,UT
So I been modifying crow foot wrenches today
Hang I'll snag a pic
All I pulled was the intake
I didn't want to drain coolant
Or pull the pully and belt
Worked good
I will say going back on much easier then off the initial break of torq is a lot DO NOT OVER GRIND and round off your bolt
The bottom fitting is bigger than the top
Bottom I probably grounded to 19 mm
Hang I'll snag a pic
All I pulled was the intake
I didn't want to drain coolant
Or pull the pully and belt
Worked good
I will say going back on much easier then off the initial break of torq is a lot DO NOT OVER GRIND and round off your bolt
The bottom fitting is bigger than the top
Bottom I probably grounded to 19 mm
Thread
Thread Starter
Forum
Replies
Last Post
rb8484
Excursion - King of SUVs
22
Feb 28, 2016 08:29 PM
madpogue
Brakes, Steering, Suspension, Tires, & Wheels
2
Dec 12, 2009 09:56 AM
mongo75
1999 - 2003 7.3L Power Stroke Diesel
13
Sep 18, 2009 04:44 PM
matt71
1994.5 - 1997 7.3L Power Stroke Diesel
12
Feb 25, 2009 12:14 PM
