C6 trans pan
Thread Starter
|
New User
Joined: Jan 2011
Posts: 4
Likes: 0
C6 trans pan
Hey folks,
I haven't had to visit this forum in quite some time due to not having too many issues with my trucks. Today however has been quite the day. my 89 4x4 started leaking trans fluid in a bad way. After some digging with my brothers help I realized the pan was leaking. After removing it i noticed it was warped and had a nasty dent in it.
What I'm wondering since none of the parts stores, or the dealer can get me a new OE type pan is where can I get a new pan? I've found a few relatively cheap on ebay that are the steel I'm looking for, but they only say "Stock capacity" that doesn't tell me diddly squat (is it the shallow or deep capacity)
I don't really want to spend more than $50 so I'm needing y'alls help. Can someone point me in the right direction?
I haven't had to visit this forum in quite some time due to not having too many issues with my trucks. Today however has been quite the day. my 89 4x4 started leaking trans fluid in a bad way. After some digging with my brothers help I realized the pan was leaking. After removing it i noticed it was warped and had a nasty dent in it.
What I'm wondering since none of the parts stores, or the dealer can get me a new OE type pan is where can I get a new pan? I've found a few relatively cheap on ebay that are the steel I'm looking for, but they only say "Stock capacity" that doesn't tell me diddly squat (is it the shallow or deep capacity)
I don't really want to spend more than $50 so I'm needing y'alls help. Can someone point me in the right direction?
Thread
Thread Starter
Forum
Replies
Last Post
packlet
Clutch, Transmission, Differential, Axle & Transfer Case
2
Mar 8, 2007 10:07 AM
Timgeorgi
Clutch, Transmission, Differential, Axle & Transfer Case
2
Nov 3, 2006 03:49 PM
wants_a_power_stroke
1999 - 2003 7.3L Power Stroke Diesel
3
May 31, 2006 09:06 PM
