Help with chassis identification?
Thread Starter
|
Tuned
Joined: Dec 2014
Posts: 296
Likes: 2
From: Denver, CO
Help with chassis identification?
I have a chassis from a 2004 Super Duty. Trying to ID what this truck was in regards to cab configuration. No axles installed to check wheelbase. Measured along the top of the chassis and came up with a hair under 210" from rear to front, no bumpers. I understand the VIN is on the frame but hard to get to for theft reasons. Can anyone help?
Thread Starter
|
Tuned
Joined: Dec 2014
Posts: 296
Likes: 2
From: Denver, CO
bought rolling chassis for the axles and chassis was included, no bill of sale. Was a salvage vehicle that had a blown 6.0l. Didnt think to check wheelbase before I pulled the axles and suspension off.
I may just scrap the frame as it may prove to be too much of a hassle and not worth dealing with...
I may just scrap the frame as it may prove to be too much of a hassle and not worth dealing with...
Thread Starter
|
Tuned
Joined: Dec 2014
Posts: 296
Likes: 2
From: Denver, CO
Not easy to find no, from my research sanding may be needed as they are hidden due to theft recovery. I have found it could be found on the pass side rail as it turns down near the front tire but can't confirm that.
Thread
Thread Starter
Forum
Replies
Last Post
cobraguy
1961 - 1966 F-100 & Larger F-Series Trucks
10
Aug 15, 2012 06:04 PM
cr506
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
46
Jul 15, 2006 02:08 AM
