what grind to use ?
Thread Starter
|
Senior User
Joined: Jul 2007
Posts: 276
Likes: 1
From: Lexington. Mi.
what grind to use ?
Hi fellas, I am in need of some help on choosing a camshaft or at least minimizing my selection, I have a 1974 F250 4x4, with a Stock lower end 390, the motor has flat top pistons, I will have a elderbrock performer RPM intake, I have Mad Dog fenderwell exit headers, I have a Stock points ignition setup, the heads have been gone through ,with new exhaust seats about 2,500 miles ago, and I'll be using the truck as a truck, no mudding or hill climbing or anything like that, so any information or tips would be greatly appreciated, Thanks in advance!
Thread Starter
|
Senior User
Joined: Jul 2007
Posts: 276
Likes: 1
From: Lexington. Mi.
hi mike68, been doing some research and I'm not seeing them part numbers on lunati site! I'm thinking they have new pn, is your motor stock with or without adjustable rockers
Logistics Pro
Joined: Jan 2011
Posts: 4,762
Likes: 54
From: Antelope Valley ,CA
sorry about that Lunati changed their part numbers shortly after I bought my cam .
here's a link to old 62001/new 10330701
Voodoo Hydraulic Flat Tappet Cam - Ford 352 - 428 256/262 - Lunati Power
here's a link to old 62001/new 10330701
Voodoo Hydraulic Flat Tappet Cam - Ford 352 - 428 256/262 - Lunati Power
Thread
Thread Starter
Forum
Replies
Last Post
krazyness
1973 - 1979 F-100 & Larger F-Series Trucks
4
Nov 17, 2016 08:06 AM
gungho351
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
2
Oct 30, 2013 04:22 PM
NW 150
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
22
Jun 7, 2010 08:57 AM
BlueovalFE
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
15
Jan 9, 2007 06:26 PM
