360 To 390
Thread Starter
|
New User
Joined: Aug 2003
Posts: 3
Likes: 0
From: OREGON
360 To 390
MY NAME IS BRYAN AND I HAVE A 1971 FORD F250 4X4 4SPD LIFTED 6" ON 35" TIRES. I WHEEL ONCE IN A WHILE, CITY DRIVE, HAUL BETWEEN 2000-8000LBS OCCASIONALLY.
MY PROBLEM THAT I NEED HELP WITH IS I HAVE A 360FE MOTOR. BLAH! I UNDERSTAND THAT I NEED A 390 CRANKSHAFT, RODS AND PISTONS TO SWAP IT TO A 390. I WANT TO REBUILD IT SO I HAVE GOOD HP AND TQ FROM IDLE TO ABOUT 4000 RPM. I HAVE HEADMAN HEADERS, AND DUAL 2 1/2" FLOWMASTER EXHUAST (SOUNDS COOL).
I WANT: TO BUILD IT INTO A 390 AND I AM GOING TO REBUILD THE ENTIRE MOTOR. I NEED SUGGESTIONS ON WHERE I CAN FIND A GOOD MASTER REBUILD KIT FOR A 390 ONCE I COME UP WITH RODS, CRANK. ALSO ANY SUGGESTIONS YOU FEEL NECESSARY/
THANKYOU VERY MUCH
MY PROBLEM THAT I NEED HELP WITH IS I HAVE A 360FE MOTOR. BLAH! I UNDERSTAND THAT I NEED A 390 CRANKSHAFT, RODS AND PISTONS TO SWAP IT TO A 390. I WANT TO REBUILD IT SO I HAVE GOOD HP AND TQ FROM IDLE TO ABOUT 4000 RPM. I HAVE HEADMAN HEADERS, AND DUAL 2 1/2" FLOWMASTER EXHUAST (SOUNDS COOL).
I WANT: TO BUILD IT INTO A 390 AND I AM GOING TO REBUILD THE ENTIRE MOTOR. I NEED SUGGESTIONS ON WHERE I CAN FIND A GOOD MASTER REBUILD KIT FOR A 390 ONCE I COME UP WITH RODS, CRANK. ALSO ANY SUGGESTIONS YOU FEEL NECESSARY/
THANKYOU VERY MUCH
