hi people..... im new to the site and into builting a new motor, i satart to work in to a new motor ( 1984 460 ) and i came across a wall , i have a machine shop deck the block and they pull the galley oil plugs and they mark few of them but not install them and im wondering if some one can help me with it need the location of galley plugs i have about 8 of them on a bag lol and it looks like it matter the location of some of them because some of them have a flat back and some of them have a mashroom back if some one can help me i will apreciated tnx.

 

Welcome, I think the j plug with the taper goes in the front and the 3/8 NPT in the rear.