351w with bolt ons?
Thread Starter
|
Cargo Master
Joined: Dec 2009
Posts: 3,452
Likes: 2
From: Santa Fe Tx
351w with bolt ons?
I scored a running parts truck, its an 1985 F250 4x4 with a t18 and a 351w. The 351 has an edelbrock rpm performer intake, hooker hedders and a 1406 edelbrock carb. With the bolt ons what is the estimated power output? I'm going to be throwing it in a 1984 ext cab swb 3 on the tree truck
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
It might make 200hp now, the stock smog heads and cam are killing it.
P.S. If this was a 4bbl motor(351HO) to begin with then it should be in the 250hp range as that motor has a much better cam, same smog heads though unfortunately.
P.S. If this was a 4bbl motor(351HO) to begin with then it should be in the 250hp range as that motor has a much better cam, same smog heads though unfortunately.
Thread
Thread Starter
Forum
Replies
Last Post
jlc84cam350
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
1
Oct 16, 2011 07:47 PM
bshackelford711
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
12
Sep 14, 2006 12:16 AM
