OBD2 Port Splitter
Thread Starter
|
Mountain Pass
Joined: Apr 2009
Posts: 225
Likes: 5
From: Colusa
OBD2 Port Splitter
Hi All,
I have a question, I use Torque Pro to monitor things and now that I programmer I was wondering if I could use a Y splitter I found on Amazon or Ebay. Not sure it will work, So I wanted to ask first. I would keep the Programmer in all the time and use the other port for my Bluetooth adaptor and the IDS when I need to use it. I have a 2000 F250 7.3 4x4
I have a question, I use Torque Pro to monitor things and now that I programmer I was wondering if I could use a Y splitter I found on Amazon or Ebay. Not sure it will work, So I wanted to ask first. I would keep the Programmer in all the time and use the other port for my Bluetooth adaptor and the IDS when I need to use it. I have a 2000 F250 7.3 4x4
Last edited by chris86924; Nov 25, 2015 at 10:59 AM. Reason: Added Truck Type
Elder User
Joined: Mar 2008
Posts: 626
Likes: 0
From: Ontario, CA
I run the Scan Gauge II on my OBD port, and was thinking of getting one of these splitters when I had my Predator tuner, as it had monitoring capability for WOT runs, etc. I never did, and I saw a post somewhere on this forum that someone tried this, and it isn't working correctly.
Found it!! https://www.ford-trucks.com/forums/1...-problems.html
Found it!! https://www.ford-trucks.com/forums/1...-problems.html
Last edited by dsquared; Nov 25, 2015 at 11:55 AM. Reason: Added Link
Posting Guru
Joined: Sep 2014
Posts: 2,404
Likes: 3
From: Asheville-where weird is
The combination of these two worked for my truck.
I am able to run Torque and a Programmer simultaneously.
I am able to run Torque and a Programmer simultaneously.
Thread
Thread Starter
Forum
Replies
Last Post
