Hey all, my turn signals recently went out and I'm pretty sure I've got it diagnosed that it's my turn signal flasher. In the chiltons schematic for the truck it shows two flashers, one for hazards, another for turn signals. So I was just wondering if anyone could point me as to where the turn signal one is at (the hazard flasher is on the fuse block I believe. Thanks for any help. I know I can search and find it eventually, but with limited time I figure can't help to have a pointer as to where to look.

Thanks
Trei

 

Both are on the fuse block. The turn signal one you see when you take the cover off, the 4 way one is on the back side.

 

Ok, thanks..I might have a different problem then because I already changed the flasher on the front of the fuse block. Any thoughts as to what would be the problem? Hazards and brake lights work, but no directional lights. Checked the fuses, and they're fine. Also swapped out the turn signal switch from a working truck as a test, still no luck.

 

Is your key returning to the run position fully? Try jiggling the key a bit. Sometimes a sticky switch is the problem.