Plug change issue
Thread Starter
|
New User
Joined: Oct 2015
Posts: 1
Likes: 0
Plug change issue
Attempting plug change on my 2010 4.6 STX 4x4 .
Everything I've found simply says using a 5/8 plug socket .
Seems the OD of socket won't allow it to go deep enough to grab plug .
I've cleaned around the plug and blew out debris .
Is there a special tool I need , like a socket wrench for a motorcycle ? Thin walled type .
Any help would be great ty .
Everything I've found simply says using a 5/8 plug socket .
Seems the OD of socket won't allow it to go deep enough to grab plug .
I've cleaned around the plug and blew out debris .
Is there a special tool I need , like a socket wrench for a motorcycle ? Thin walled type .
Any help would be great ty .
Moderator
Joined: Jul 2011
Posts: 6,506
Likes: 655
From: Sioux Falls Area
It's been a while since I've watched this but I think he gives a few tips on things you need in general.
https://www.ford-trucks.com/forums/1...al-method.html
You shouldn't have any troubles with broken plugs, but hopefully this will help.
https://www.ford-trucks.com/forums/1...al-method.html
You shouldn't have any troubles with broken plugs, but hopefully this will help.
Thread
Thread Starter
Forum
Replies
Last Post
askoop
1999 - 2016 Super Duty
9
May 30, 2015 09:12 PM
