I put like 4 coats of rustoleum on my truck. Did the wheels too and added a stripe. Check it out.
1992 f250 custom 351 4x4 155ooo miles

 

Looks good. Did you set up any kind of paint booth to keep bugs,dust,etc off of the paint?

 

Disclamer No Bugs were harmed in the painting of this truck. Maybe 2. I tried to save them. Honest I did

 

Check out my Dads Garage. He took 2 gas station doors and put them together.
You might have 2 listen to some music before the garage seen

 

was that rolled on or sprayed on?

 

I Shot it with 35 dollar ebay gun. It looks better in the video than it is. It needs to be polished.

 

i cut rustoluem 60/40 with acetone and then shoot it with a $15 harbor freight gun.
3-4 coats, then wet sand with 2000 grit and polish.
next one i do is going to get overlaid with clear coat.

 

Cool. Rustoleum told me to max out at 15 percent acetone but I was having trouble getting a gloss.Last coat I put more and it seemed to help with the gloss. After you
sand and buff out the paint what do you do to prep for clear?

 

well, i have not used clear yet. but i saw a few weeks ago where rustoleum is coming out with or already came out with their own clear coat, so i am going to try it on the next one i do. i get 3-4 years out of the trailers and machines before it starts to fade and chalk. i have never done a complete car or truck yet, just the frames.
my 88 is going to be the test rig for a complete rustoleum paint job.

 

I saw that. Sound like a Landscaper. I am 1 hedge trimmer hand cut, 2 lyme
disease. My last was a heat stroke the preveous season. Take it easy dude.
Dont work to Hard. Watch sanding that rustoleum stuff. I wear a dust/resperator or run water constantly over it when wet sanding.

 

Gloves too or shopping bags

 

nah, i now do heavy construction. and run a heavy equipment escort service on the side.
i was a partner in a body shop for 20 years too.
did frame repair and heavy vehicle fabrication.