Parts help
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
What year is your truck; what series; A/T or M/T; 2WD or 4WD? If 1978/79; with or without tilt wheel?
D3TZ-3D681-A .. Steering Column Lower Bearing Retainer-includes sleeve and bearing / Obsolete
The bearing and sleeve were available by themselves.
1973 F100/250 4WD from serial number S40,001 / 1974/79 F100/250 4WD / 1978/79 F100/350 2WD
No Ford dealer or obsolete parts vendor has any.
Thread Starter
|
Tuned
Joined: Dec 2012
Posts: 345
Likes: 2
Be gentle Number!!!!........i have the Master Parts catalog........but another parts guru told me that there is a different set of books etc for newer part numbers and supersedes.......if i can get those from the Master Parts catalog dvd i have please enlighten me.......and thanks for checking on the number
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
Be gentle Number!!!!........i have the Master Parts catalog........but another parts guru told me that there is a different set of books etc for newer part numbers and supersedes.......if i can get those from the Master Parts catalog dvd i have please enlighten me.......and thanks for checking on the number
AFAIK, the final edition of 10/88 is not available on a C/D, it's only available on microfiche slides. It was available from Ford in 2006: $125.00
Who on FTE has a microfiche viewer, who has the 10/88 final edition on microfiche...besides myself?
hipoparts.com's 1973/79 Ford Passenger Car Parts Catalog (includes Bronco) on a C/D was scanned from the final 11/88 loose leaf paper catalog.
Pic: Scroll down to 3D681 / Bronco = U / Bottom of page sez: November 1988
Thread
Thread Starter
Forum
Replies
Last Post
DaytonaTunnel
1973 - 1979 F-100 & Larger F-Series Trucks
3
Jan 19, 2011 01:50 PM
zoomeroo
1973 - 1979 F-100 & Larger F-Series Trucks
3
Mar 3, 2010 07:26 AM
lapper52
1973 - 1979 F-100 & Larger F-Series Trucks
3
Aug 11, 2009 12:46 PM
compressorguy
1973 - 1979 F-100 & Larger F-Series Trucks
6
Jan 22, 2008 11:08 AM
