I have a 1985 F700 with the Lucas Girling brake system. My local Ford dealer can't help because the system only goes to the F550. I'm hoping someone can give me a part # for the parking brake control valve. When I did a Google search I found a valve for a 1991-1998, but I don't know if it is the same one as mine. Any help would be greatly appreciated. Thanks in advance.


Pat

 

1980/89 Ford HEAVY Truck Parts Catalog includes all 600/900 series trucks. There were no F550's back then.

Here are the 2 pages that list all the 'valves' for 1980/89 600 and larger series trucks. I don't see any that meet the criteria.

Suggest you call Green Sales Co. for assistance: 513-731-3304.

 

Thanks Bill. I wonder if I don't have the right name for the part. The number I found for the 1991-1998 part is F1HZ2K806A. I will definitely call Green Sales. Thanks again.


Pat

 

2K806 "Parking Brake Control Valve Assy" from 1980/89 catalog.

E5HZ-2K806-C from 6/85* may be what you want, since it says model 81 which is a conventional cab / It's obsolete.

PARTS INTERNATIONAL in Farmers Branch TX has 8 = 888-727-0418.

Call Green Sales and verify the above part number. The valve used before 6/85* was replaced by multiple parts.

*Production date printed on Certification Label.

E5HZ-2K806-D is for a model 84 open drive-away chassis and cowl (no cab or windshield).

 

Thanks Bill. I spoke to a fellow at Green Sales today and he gave me a similar # E5HZ-2K806-B and something called a mat # 86027. Of coarse both Ford dealers in my area don't have a clue what I am talking about.
I'm wondering if you know anything about this mat #. I have tried some truck parts stores and they don't know what I am talking about either. My truck was built 11/ 84. The vin # is 1FDPF70H5FVA15581. Thanks for all your help.


Pat

 

See what it says at the bottom of the page?

The original (before production date 6/85) valve was Replaced By multiple parts (R/B MAT #86027).

MAT letters will be in the 1980/89 600/900 truck catalog on microfiche...which Green Sales should have.

Most dealers will have the MAT letters, but today...most parts guys don't want to mess with trucks this old, so they 'just shine you on.'

EDIT > This #86027 MAT letter is listed in the 1980/89 Ford Light Truck Parts Catalog (Slide #3) on microfiche, Column 27. I have it, so Green Sales should have it...too.

If you get no satisfaction from Green Sales, email me your phone number (sylhall@aol.com), best time to call Saskatchewan (I'm in Los Angeles, PDT).

 

Bill thanks for directing me to this thread, my truck has hydraulic brakes, I called green sales and they was able to give a part number by the info I gave them on the truck but the part has been discontinued any recommendations on trying to have the part number crossed, part number is E5HZ2B257A

 

Green Sales had the part I needed. I kept thinking I could get it locally, I won't make that mistake again. Thank you very much Bill, especially for offering to phone me.


Pat.

 

Tucker88, I just did a Google search for your part # , and got lots of hits.

 

You sure this is what you want? It does not match your description of a parking brake control valve.

E5HZ-2B257-A .. Brake Pressure Differential Valve (some people call this a proportioning valve) / Obsolete

FYI: E2FZ-2B264-B .. Brake Pressure Differential Valve Warning Lamp Switch-threads into valve.

Look in this pic below the master cylinder for 2B257...is this what you want? The pic is 1983, but it's the only one that shows this valve clearly.

 

CONTROL VALVE PLUNGER! That's exactly what I was looking for rivaration, thank you! I didn't even know what to search for, and I sure as hell wasn't calling up my local shop and asking them if they had any parking brake thinga-ma-jiggies laying around.
Visit here